Multi-Functional Trainer Rack

The Multi-Functional Trainer Rack has been designed to encompass three fitness machines into one, ideal for the home and light commercial gyms:

1. Dual Multi-Pulley
2. Half Rack
3. Smith Machine

By doing so, it takes up less floor space in a home or gym/fitness environment

Two 90kg (Rear) Weight Stack Towers, Pull-Up Cross Beams (inc. TRX support), Smith Machine Bar, Olympic Bar & Disc Storage
Attachments: Stirrup Handles, Dual Dip Handles, J Hooks, Landmine, Dual-Grip Landmine Bar, Tricep Rope, Collars & Upholstered Roller

The 870C is a strong, versatile addition to any home/light commercial Olympic weightlifting suite. It is suitable for athletes and gym-goers alike, offers great variety to any workout programme, all without taking up too much space

The Rack is constructed from heavy-gauge steel section, ensuring that both are stable and built to endure the most vigorous workout

The Rack has anti-slip foot pads, for both safety and to protect polished floors

PRODUCT DIMENSIONS (L x H x W)
Length
219.7cm / 86-1/2”
Height
225.8cm / 88-7/8″
Width
125.3cm / 49-5/16″

WEIGHTS
Weight
428kg / 943.6lbs.
Maximum User Weight
180kg / 397lbs.

STRUCTURE
Frame Construction
This products frame is constructed from commercial quality 2mm (14 gauge) steel that is designed to give exceptional structural integrity and stability even during the most vigorous workout
Frame Protection
Once welded, the frames are treated against corrosion by being grit blasted and zinc pre-treated (for guaranteed durability). They are furnace baked, heat-cured and electrostatically epoxy powdered (which ensures maximum adhesion). This gives them a tough, corrosive-resistant and easy to clean finish, offering unbeatable reliability and longevity
Weight Stack Tower – Guarding
The weight stack tower is fully enclosed

OPERATION
Fully Enclosed Weight Stack Tower / Magnetic and Tethered Weight Stack Pin / Variable Increment Weight Plates / Guide Rods
The selectorised Multi-Functional Trainer Rack provides users with a low starting weight and yet still has the capacity of a full weight plate range. This means users can build up their workout gradually, whilst the equipment still accommodates the widest possible user group
The 90kg weight stack towers are completely covered to provide the best possible user safety experience, protecting bystanders from accidental contact with a moving weight plate. The front facing shrouds are full-length, with a wide slot, giving access to the weight stack pin. The magnetic weight stack pin assures positive locking into the weight plates and is secured to the weight stack via a plastic-coated tether cable. The pins cannot be removed from the machine. The weight stack pins are colour-coded for easy identification
The cast and machined solid-steel weight plates come with precision fitted self-lubricating nylon bushes. This is to ensure smooth travel on the guide rods which are made from steel, polished with corrosion-resistant chrome plating for a smooth operation
The weight stack towers are so positioned to be accessible from a seated or standing position
Weight Stack Suspension
Proven rubber bumper damping system
Smooth Operation
Pulse Fitness strength products are renowned for their smoothness of operation. This results from our precision-engineered transmission system and weight stack tower assembly, which reduces the coefficient of friction and significantly cuts maintenance costs
Cable Transmission
The preformed and braided stainless steel cable, is rated to over 600kg / 1322.80lbs. load. The cables construction is lubricated, nylon-coated, and meets heavy-duty commercial specifications
Enclosed Pulleys and Bearings
The pulleys are constructed from nylon that is reinforced with fiberglass and designed with a deep V-grooved channel, to provide a secure cable seating
The pulley’s bearings are precision ground and have sealed ball bearing races, for added durability and a ‘fluid’ smooth feel
The pulley’s pivot axles are solid steel with oil-impregnated bronze bushings that allow for precise alignment and frictionless movement
Cable and Pulley Ratio
2:1
Hand-Grip Assembly
The hand-grips have been positioned to ensure a neutral wrist position is always achievable. This facilitates less stress on the users wrist, which in turn allows for a more comfortable, and a safer work-out
The hand-grips are formed from a slip-resistant material that is non-absorbing and wear-and-tear resistant
Variable Height Pivotal Pulley
This allows the user to focus on either upper and lower limbs, as well as the trunk musculature
Range of Motion
All machines within the range have a full and natural range of motion, which increases flexibility and enhances the muscle’s ability to perform
Smith Machine Powerbar Assembly
30mm Knurled Grip, with Sealed Bearings and Multi-Hook options
Pull-Up Cross Beams
Multiple-grip, chin-up handles (with TRX support)
Olympic Plate Storage Posts
Detailed with a durable Polypropylene (PP) surface finish (x6)
Integrated Storage
For Powerbars to be easily accessible (x2)
Mouldings
The injection-mouldings are durable, high impact thermoplastic housings, which seal internal components, protecting the vital parts against dust and sweat, and are easy to wipe clean
All rubber coverings are durable and have a high impact resistance; they too, are easy to wipe clean

ATTACHMENTS
Via commercial grade Carabiners:
Stirrup Handles (x2)
Adjustable, Multi-Grip Rubber Covered Dual Dip Handles
J Hooks
Landmine
Dual-Grip Landmine Bar
Tricep Rope (with moulded Rubber Knobs)
Quick Lock Clamp Collars (x2)
Ankle Roller

ADJUSTMENTS
Manual Adjustments
Manual adjustments are made simple via easy-grip, pull spring-loaded, lock-pins that are constructed using a hardened plunger and chrome plated ‘tube-in-tube’ adjustment assemblies
Frame Adjustment / Quick Reference
Laser-Etched and Numbered, Half Rack Modular Frame Uprights
Alignment
All points of axis and rotation are located so as to enable perfect alignment of body and machine – reducing the risk of training injury
Multiple Start Positions
The user can choose between multiple starting position. This allows for a wide range of both toning and bodybuilding workouts to be undertaken
Multiple Grip Positions
Multiple grip positions allows the user to be more specific about which muscle groups are worked out

INSTRUCTIONS
Ease of Use
Weight selection and all adjustments are simple and easy to make from the exercise position with all positions clearly indexed
Graphic Information Panel
The graphic information panels are designed to show an easy-to-follow, simple step-by-step pictorial instructions. These illustrate the machines setup, the correct operating procedure, user start and finish positions and which identify which muscle groups will be trained during the work-out

COMFORT
Upholstery Construction
The long-lasting, easy-to-clean upholstered support rollers have a high resistance to: abrasion, ageing, bacteria, disinfectant, mildew, oil and stains. They are puncture, wear resistant and made from vinyl

SAFETY
Moulded Plastic Foot Pads
Designed to protect polished floors whilst enhancing safety. Moulded rubber foot pads are supplied as standard

Optional Accessories
Adjustable (Length) Incline Bench

Click here to contact Pulse Fitness for details